Product
Molybdenum Sputtering Target
Yolo produce target from molybdenum raw materials production. Ensure molybdenum particles size is tiny uniform. Now, our target was widely used in X-ray, LCD and glass coating industry.
Details about Molybdenum Sputtering Target
If you are looking for a suitable molybdenum sputtering target for the following applications, you are in the right place.
Our molybdenum sputtering target can form thin films on various substrates, such as:
- TPT-LCD (Thin Film Transistor-liquid Crystal Displays)
- Thin-film semiconductor tube liquid crystal display
- Plasma display &Field emission display
- Inorganic light-emitting diode display
Or
- Sensors
- X-ray Tubes
- Semiconductor device
- Thin-film solar cells
- Field-effect transistor gate with tunable work function CMOS (complementary metal-oxide semiconductor).
For Example?
Glass Film & LCD & X ray tube
If you want to purchase sputtering target materials for LCD display, coated glass industry (architectural glass, automotive glass, optical film glass, etc.), thin film solar energy, surface engineering (decoration tools), (magnetic, optical) recording media, microelectronics, automotive lights, decorative coating, etc. Please contact us immediately.
Glass Film Coating Industry
Architectural glass, automotive glass, optical film glass, etc. Yolo’s molybdenum target will be your best choice.
We can help you increase the film formation speed, reduce the damage of impurities to the film, and ensure the quality and efficiency of the coating process. Especially suitable for large-area coating production.
If you have the problems like followed, please don’t worry.
1. Film Peeling？ No way !
99.95% target purity and material uniformity
If there is a problem of film peeling in your coating, impure target is the main reason.
Under the action of electromagnetic field, the impurity particles in the target will fly to the glass surface during sputtering, and then the film will not be firm…
You don’t have to worry about this problem with our target material, Yolo’s professional “purification technology” , directly kill all the possible problems on the raw material side， to ensure no impurities, of course no film falling off.
Contact us to get the composition data sheet.
2. Faster Film Forming
Molybdenum Materials Grain Size
Are you satisfied with the film forming efficiency? If the efficiency is low, it may be because the grain size is too large or uneven.
As shown in the figure, Yolo powder is on the left. The smaller the grain size is, the more the grain boundaries are. It is easier to be attacked in the sputtering process. The faster the deposition rate is, the faster the film will be formed, which will also enhance the quality of the film.
Yolo: Uniform particle size
Some others particle
3. Sputtering target burnt out? No way !
High density and porosity of the target material
Did your target burn out in the early stages of use as picture? loose and porous structure of molybdenum materials adsorbs impurities and moisture, hinders the rapid acquisition of high vacuum, and eventually leads to discharge during the sputtering process, and even burns out your target. . .
You can try our target material, because we start production from molybdenum powder, sintering, forging, and secondary forging to ensure the maximum density of the material structure.
Liquid Crystal Displays (TFT-LCD)
If you want to improve the brightness, contrast, color and life of the liquid crystal display in the LCD, Yolo’s molybdenum target can satisfy you. Now, especially in the TFT-LCD field, Yolo’s molybdenum sputtering target is very popular.
Do you think the created layer ’s conductivity is always not high, and pixel in the TFT-LCD display can not be precisely controlled?
That is actually because your sputtering speeds are not high. why? Only if the density is high, the sputtering speed will be high, and the conductivity of the layer will be better, every pixel in the TFT-LCD display is precisely controlled
Therefore, when choosing the target material, sharpen your eyes, the grain size, density, and structure are very important.
X-Ray Tube Anode
Mo materials, as anode target is a good X-ray source for X-ray tubes.
At present, Yolo anode target materials are widely used in
- Medical X-ray tubes
- Industrial X-ray tubes
- Open X-ray tubes and closed X-ray tubes.
From now on, you don’t have to worry about the followed problems.
1. Emission effect of the anode target Not good?
The humble little white spot may be the culprit.
You must know, anode target (molybdenum target), is the key component of X-ray tube, producing X rays by bombarding the target surface.
Therefore, X-ray tube has a high demand for anode target.
If you find these white spots on your anode surface, don’t underestimate them. They are due to impurities, the large and uneven grains lead to grain shedding.
It will reduce the emission function and service life of the tube’s anode target. More seriously, a large number of products are scrapped.
Why Choose Us?
Yolo improves the density and uniformity of the target, because we produce molybdenum powder at the beginning. Every batch of materials will be under SEM inspection, Any unqualified materials will be removed.
Increasing the density and improve the structure through multiple forging and annealing. Finally, reducing white spot defects and improving its repeatability and reliability,
Powder Production
Pressing
Sintering
Annealing
Machining
Packaging
Vacuum Degassing
Dynamic Balance
What is the Core Competitiveness of Yolo’s molybdenum target?
Raw Materials
In China, only less than 1% of manufacturers of tungsten start with raw materials production. Fortunately, we are one of these few manufacturers. The overall particle uniformity of APT raw materials we use is better than that of other companies in the market, which can guarantee the overall quality.
Mirror Finish Ra0.2
Burnishing and polishing molybdenum target surface with imported finishing powder with introduced “Kramco 910” from the USA. Leave three times the thickness of the raw material for double-sided alternating polishing, wet refining, polishing with polishing powder and final grinding. Finally, the moly target’s surface finish is below Ra0.2.
Do you have problems with burrs on the molybdenum target surface?
This seriously affects the sputtering effect, especially in x-ray field. And, this, in turn will affect you or your customer product experience, right?
Actually, problems with burrs are related to the treatment process of the target surface. Here at Yolo, we polish the surface to make it completely smooth and burr-free, just like button cells.
Polishing
If you want to know the grain size of the target raw material, We can provide metallographic analysis photos. If you want to know the composition of the molybdenum target material, we can provide composition analysis and quality reports.
English
العربية
Nederlands
Français
Deutsch
Italiano
Português
Русский
Español
