Tig welding Electrode

WY

Product advantages:

• slender arc beam,
• large degree of compression,
• Largest penetration depth under medium and large currents

Main uses: aerospace, milittary and other high-tech industries.

WT20

Its overall welding performance is better than that of pure tungsten electrodes and other oxide-doped electrodes.

Pros:

• easy operation,
• easy arcing,
• stable arc,
• small loss,
• electrode head is not easy to round
• long service life

Cons:

• Slightly radioactive

Main uses: Thoriated Tungsten electrode is widely used in the welding of carbon steel, stainless steel, nickel alloy, and titanium, etc. It is the material of choice for high-quality welding.

WL

Lanthanted tungsten electrode is similar to thoriated tungsten electrode

Pros:

• superb electric conductivity and welding performance,
• not radioactive
• can be used instead of thoriated tungsten electrode,
• high carrying capability,
• minimum ratio of burnt space,
• primarily used for DC welding

Main uses: Primary substitute for radioactive thoriated tungsten electrode.

Quality Solution

Do you often have trouble with splitting when sharpening or welding?

This difficulty increases purchasing and labor costs. It also affects work performance during welding.

Problems with splitting occur due to the use of cracked electrodes which didn’t undergo flaw detection checks. 

At Yolo, we inspect each of our electrodes using advanced equipment to remove cracked rods. We 100% ensure that your electrode will not have any splitting problems. Whether you are sharpening or welding, you will have near-perfect results!

• Electrode not durable when soldering?

When others use one electrode to complete the same material, do you use 2-3 pcs?

For more efficiency, you need an electrode with a uniform structure. In fact, the more uniform the internal structure, the longer the service life of the electrode.

The most important part of tungsten processing is starting with the correct raw materials. In China, only less than 1% of manufacturers start with raw materials. We are one of these few manufacturers.

We control the uniformity of the mixing powder, the temperature, and every other process. Almost all tungsten factories start with purchased semi-finished products. But we start with raw materials. So you’ll find one of our electrodes stronger than two from other factories.

As you can see, Yolo will save you a lot of purchasing and labor costs.